Fluke 113 Dijital Multimetre

Fluke 113 Dijital Multimetre
Description

Genel Özellikler

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
  • True-rms for accurate ac measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
  • The optional TPAK magnetic hanger allows the user hands-free flexibility 

Teknik Özellikler

Specifications
VCHECK 1,2
Range  6.000 V
   60.00 V
   600.0 V
Resolution  0.001 V
   0.01 V
   0.1 V
Accuracy  DC, 45 to 500 Hz:2.0 % + 3
   500 Hz to 1 kHz: 4.0 % + 3
Diode test 3
Range  2.000 V
Resolution  0.001 V
Accuracy  2.0 % + 3
Continuity3
Range  
Resolution  
Accuracy  Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer
3
Range  600.0 Ω
   6.000 kΩ
   60.00 kΩ
Resolution  0.1 Ω
   0.001 kΩ
   0.01 kΩ
Accuracy  0.9 % + 2
   0.9 % + 1
   0.9 % + 1
Capacitance3
Range  1000 nF
   10.00 μF
   100.0 μF
   9999 μF
Resolution  1 nF
   0.01 μF
   0.1 μF
   1 μF
Accuracy  1.9 % + 2
   1.9 % + 2
   1.9 % + 2
   100 μF - 1000 μF: 1.9 % + 2
   > 1000 μF: 5 % + 20

Notes:
1 All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2 Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

 

Specifications
Maximum voltage between any terminal and earth ground
   600 V
Display
   3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature
   -10 °C to 50 °C (14 °F to 122 °F)
Storage temperature
   -40 °C to 60 °C (-22 °F to 140 °F)
Temperature coefficient
   0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C)
Operating altitude
   2,000 m
Storage altitude
   10,000 m
Relative humidity
   95 % to 30 °C
   75 % to 40 °C
   45 % to 50 °C
Battery type
   9 Volt Alkaline, ANSI 1604A / IEC 6F22
Battery life
   Alkaline: 300 hours typical, without backlight
Shock
   1 Meter drop per IEC 61010-1-2001
Vibration
   Per MIL-PRF-28800 for Class 2 instrument
Size (HxWxL)
   167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in)
Weight
   13.0 oz (404 g)
Safety
   Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category III, 600 V, Pollution Degree 2, EMC EN61326-1
EMI regulations
   Complies with FCC Part 15, Class B

 

Specifications
VCHECK
Input Impedance (Nominal)  ~3 kΩ < 300 pF
VCHECK
Common Mode Rejection Ratio (1 kΩ Unbalanced)  > 60 dB at dc, 50 or 60 Hz
Ω
Open Circuit Test Voltage  < 2.7 V dc
Full Scale Voltage  < 0.7 V dc
Diode test
Open Circuit Test Voltage  < 2.7 V dc
Full Scale Voltage  2.000 V dc
Short Circuit Current  < 350 μA
Diode test
Short Circuit Current  < 1.0 mA

Dokümanlar